Quick Guide: Basic Components of DIY Drone

Drones are very popular nowadays, because of its capabilities and other specialized assigned task to be carried out. This new type of gadget, became popular because of its ability to take great aerial images and live video. Other professionals, used drones to take some aerial videos instead of using a helicopter.

On the other hand, drones are little bit expensive, especially those who have a built-in good camera. Those price, are worth it especially that the technology a drone is packed with. There are well-known drone manufacturer that will satisfy the needs or the preferred drone you want to have.

Drone, with or without a camera, is just a simple thing build, it doesn’t need much of skills. Building a drone, need a simple research on something, so that it all the components will complement each other.

But on this post, I will discuss the basic components of a drone, the necessary materials needed to build a DIY drone at home.

Note: Research first before you even to buy the components, so that no major problem will occur during building a drone.

 

Basic Components to Build in DIY Drone at Home:

 

  1. FRAME

This component is very important, because it will hold all other components of a drone. It’s just like a body, where other materials are located. Materials of the frame must be carefully chosen, because a tougher material means that it is more durable. It could withstand multiple crash or impact before it will break or damage.

Materials used for drone frame, click here.

 

 

  1. Motors

This is one that will make the drone to fly, how high it could fly or how much speed it will have. But, this component must be research carefully because the drone will have problem if not properly assess first. Also, it must be complimented properly with the frame and propeller.

There many types of drone motor available now in the market, so a thorough research is a must before you even buy it. Motors will spin on different location, means that if you build a quadcopter, two motors will spin on same direction while the other two spins on opposite direction.

Types of drone motor, click here.

 

3. ESC (Electronic Speed Controller)

The electronic speed control, or ESC, is what tells the motors how fast to spin at any given time. You need four ESCs for a quadcopter, one connected to each motor. The ESCs are then connected directly to the battery through either a wiring harness or power distribution board. Many ESCs come with a built in battery eliminator circuit (BEC), which allows you to power things like your flight control board and radio receiver without connecting them directly to the battery.

 

 

  1. Propellers

This component will be the responsible making the drone “literally” to fly. Without this component, the motor is just useless. Another also, is that propellers must compliment on the drone motors and frame to properly function the drone.

Most common types of propellers have two blades but a three blade or four blade is now available in the market also.

 

  1. Power Distribution Board

As the name suggests, a PDB distribute the power on your drone, and provides a neat and tidy way of connecting your battery to all of your ESC’s on your aircraft. A PDB has positive pads/terminals which are all connected and negative terminals/pads which are all connected.

PDB’s are often an overlooked area of multirotor drone building, mainly because they are fairly simple but despite this they are a crucial part of your drone and if you don’t choose the right one you could end up losing your drone.

 

 

  1. Flight Controller

The flight control board is the ‘brain’ of the drone. It houses the sensors such as gyroscopes and accelerometers that determine how fast each of the drone’s motors spin. Flight control boards range from simple to highly complex.

 

 

  1. Battery

Another important components is the battery, motor will not spin without this. Drones typically use LiPo batteries which come in a variety of sizes and configurations. We typically use 3S1P batteries, which indicates 3 cells in parallel. Each cell is 3.7 volts, so this battery is rated at 11.1 volts.

LiPo batteries also have a C rating and a power rating in mAh (which stands for milliamps per hour). The C rating describes the rate at which power can be drawn from the battery, and the power rating describes how much power the battery can supply. Larger batteries weigh more so there is always a tradeoff between flight duration and total weight.

A general rule of thumb is that doubling the battery power will get you 50% more flight time, assuming your quadcopter can lift the additional weight.

 

  1. Radio Transmitter and Receiver

This part will allow yourself to control the drone, such how high it could fly or how fast it will fly. Also, if you attach an accessory to the drone, you can control on this component.

At least, four channels is the minimum for a drone but the recommended one, is at least have eight channels.

 

 

Those are the basic components of DIY drone, but you select a wide variety of components in the market today. All the components must be complement with each other to avoid any major problems during assembling of it.

A Two Day Training Session to be held in Dubai; about the use of Drones, this coming October 16-17

Drones are everywhere now, with different capabilities but it is very difficult to fly one. Flying any drones is very difficult that needs a time and effort in order to master the skill. But if you master the skill of flying a drone, is both satisfying and fun experience. Also, buying a drone with without any knowledge on how it’s components works, can be pain in the ass also.

If you’re a drone enthusiast or just playing it for fun or just an owner, this is your chance to get free training sessions from the world’s best and legally register drones in one place. This free training sessions will be held to Dubai.

This Unmanned Aerial System (UAS) Forum will be on October 16-17. This forum aims to inform and educate the industry about safety and legal usage of drones. The hosting for this forum will be the Dubai Police and Dubai Civil Aviation Authority (DCAA).

On this event, drone owners and enthusiast will benefit on this training session and have the chance to legally register their drones.

This two day forum will be organize by the International Quality and Productivity Center (IQPC) Middle East, features a conference with plenary sessions, innovator sessions, roundtable discussions, study presentations, technical and workshops on future use of drones.

The speaker on this event, includes Senior Leaders of Dubai Police, Dubai Civil Aviation Authority (DCAA), Dubai Civil Defense, Telecom Regulatory Authority (TRA), IATA, Royal Military Academy of Belgium, Imperial College of London, Petroleum Institute and other private sectors.

This two day training session will free for the first 200 pre-registered participants, which will have a in depth knowledge and understanding about unmanned aerial systems, which shaped by perspectives from the local industry and the regulatory insight of international entities.

 

TO REGISTER, Click HERE.

 

 

Copyright Quadcopter Zone 2017